Pages

Monday, May 28, 2018

A Tale of Three Trips


The binoculars are for "seeing trout." 


Trip #1

     Last season, my son and I had a successful trip to the Hammonasset River, targeting trout rising to Quill Gordons. The little guy caught his first trout, a brookie, as well as a rainbow trout. He was bummed that we lost a brown trout and were unable to check it off his list. 

     This season, I vowed that he would get his brown trout. The water was much higher this year, so the little guy had to fish from the bank. Another big difference from last year was that the trout would not rise this time. I suspect the high, cold water had something to do with it. No worries, we had nymphs and wet flies that did the trick. He lost the first fish hooked, an acrobatic rainbow, but I assured him there were more opportunities. A few minutes later, he had his first brown trout in the net and checked off his list! 



     He was at least as proud of himself as I was of him. He asked what the next kind of trout he will catch next. Short of flying him out west to chase cutthroats, the only thing I could come up with was tiger trout. I warned him that they are few and far between, but it was no use. A new quest has emerged. Time to distract him with sunfish! 


The elusive brown trout

Trip #2

     It had been far too long since the last time I fished with my friend Mark (Fishing Small Streams). Mark and I used to fish the Hendrickson hatch on the Farmington at least once a season, but I have been distracted by migratory fish the past two springs. I knew it was time to revisit our old haunts before Mark moves. 

     Before the hatch started, I caught my first trout of the season on a #2 Grey Ghost. I was using a 6 wt. switch rod, so it wasn't much of a battle. I soon caught another, which didn't put much of a bend in the rod. Then I lost a third, which did put a bend in the 11' Sage Z-Axis. It put a big bend in the rod before it thrashed on the surface, threw the fly, and swam back to the depths. Oh well, there was more action to come...

      The hatch materialized, but the fish weren't too keen to rise. I picked off one on a wet fly after changing pools. I didn't see many rises. The rises I saw were isolated. I went back to the streamer while we waited for a potential spinner fall. 

     I wasn't too optimistic about a good spinner fall considering how windy it was. But, low and behold, we saw a ton of spinners over the water. The popular pool we chose was too crowded for my comfort, so I moved to the next pool upstream. It's a small pool, and two anglers were already in it,  but I was able to sneak in at the tail. 

      It wound up being a good choice. It was quite a spinner fall...the most prolonged spinner fall I've fished in quite a long time. The trout were plentiful but small. I even caught some while fishing from the bank. Finally, I hooked a better fish, but lost him as he raced towards the tail of the pool. No worries, the action was far from over. 

     There was a decent trout rising in the very fast water at the extreme edge of the tail, just above the rapids. I drifted a spinner over it a few times before it ate. I got the fish close to me but, once it saw me, it bolted. I had been catching all small fish and hauling them in, so my feisty fish senses were a little dull when I hooked this one. This trout was absolutely not going to give up easily and it escaped into the fast water below. It was time to put on my running shoes. I kept tight on the trout for a good distance downstream. I thought I could land it in one of the pockets, but no dice. The fish didn't stop running until it crossed into the next pool downstream. 


Not particularly large, but full of piss and vinegar! 

     I was able to land the fiery fish in the soft water of the new pool. It was well hooked and thrashed wildly while I tried to remove my spinner from its mouth. I thought the fight was over, but this trout didn't get the memo. It wasn't a particularly large trout, maybe 17"-18" at best, but fought like a demon. I was happy I didn't break my ankle. Whatever I hooked next probably wouldn't have been that exciting, so I decided to call it a night! 


Shad fight tough, but are a delicate fish. Whenever possible, I now release shad without touching them. 


Trip #3

     Data! Data doesn't lie. I knew I could have a good day of shad fishing if the water fell below a certain level on the gauge after Mother's Day. I've been trying to fish closer to home more often and only wanted to make one trip this year, as long as it was a good enough trip. It wasn't the most spectacular day of American shad fishing I've ever had, but it was good enough to scratch the itch for the season. There were some fairly large fish in the mix too, so that was a bonus. Actually, I hooked a few real tough ones. 

     It pays to keep track of data throughout a few seasons. It can make trips successful when time is limited, as it has been for me the past year or so. I had no specific local intel on this spot, but I've fished it enough to know when it should produce. It produced as expected. It was fun. I'll go back next year, after Mother's Day, when the water is below a certain level...






Tuesday, May 8, 2018

Don't Lose It, Reuse It - Part II (Shaving Brush Restorations)


Premium quality badger knots from Elite Razor

     After salvaging my old badger knot for flies and reknotting its handle, I realized I had enjoyed the process. The flies weren't much different from others I had tied before, but the brush restoration was new to me. It was interesting, fun, and it was a new skill to learn. Plus, I needed a little break from fly tying at that point. This project started when winter returned in late February, so I didn't miss much fishing.

     I went to antique stores and searched eBay for vintage shaving brushes in need of restoration. The first couple were sort of rough, but I caught on quickly and learned what to look for. I have done a lot of grinding and sanding the past couple of months. I would actually love to do more, but I only need so many brushes. I probably don't need as many as I currently own, but I have been enjoying the process and learning about the subtleties of brush making and restoration. Here are some pics of restorations completed this winter and early spring:


Rubberset 200-3 w/24mm mixed badger and boar knot
This scrubby, barber-style brush is a keeper...in my top three

Ever-Ready 100 w/22mm two band badger fan knot
Magnets are installed in the handle to hang dry w/o a stand

Century mini-brush w/16mm synthetic knot

Rubberset 153 w/22mm two band badger bulb knot
This one was made for my friend Frank,
who might as well have been shaving with a roadkill brush. 

Ever-Ready 650PB w/22mm Tuxedo synthetic knot

Ever-Ready 150 w/26mm Plissoft synthetic knot

Made Rite 303L (ivory) w/22mm Silvertip badger knot

Made Rite 303L (black) w/22mm two band badger fan knot
I didn't plan on buying this, but it was a good companion
to the ivory-colored brush above. 

Rubberset 754 w/20mm Tuxedo synthetic knot
This one fits in a large pill bottle and now lives in my carry-on bag.

Rubberset 203 w/24mm Manchurian White badger fan knot

Erskine 120 w/24mm High Mountain White badger knot
Along with my original restore and the Rubberset 200-3 above,
this one rounds out my top three. Pillowy soft! 

     Most of this work was leading up to restoring a coveted Rubberset 400. Sanding these old resin brushes is not too hard. Sanding and polishing aluminum is a lot more work, so I wanted to be sure my technique was sound before putting in 4-5 hours worth of work on this. In the end, it came out pretty good! I might remove the knot I installed and have a super premium knot installed by Declaration Grooming. Here is a progression of sanding...

Original, well used condition w/boar bristles

Before sanding - 400 grit wet sanding

600 - 1500 grit wet sanding

2000-3000 grit wet sanding and first polishing


5 hours later...with a mirror finish and a 24mm B5 knot from Declaration Grooming


     Like flies, I have way more brushes than I need, but I like variety. Want one? Let me know...I'm fishing again now that spring has sprung, but would gladly take a break for an excuse to work on some old brushes. Based on a recent comment from my wife, I won't be restoring any more for myself anytime soon! Thanks for indulging this slight departure. More fishing content coming soon...


Thursday, May 3, 2018

Don't Lose It, Reuse It - Part I


The old badger hair knot, repurposed 

     "Don't lose it, reuse it!" It's a rally cry of Rocky, the mixed breed, recycling truck-driving pup from the Nickelodeon cartoon, "Paw Patrol." I know this because I have a young child who enjoys the show and the toys. As mind numbing as the show can be for adults, there are some pretty solid messages for both young and old viewers. Lately, I've tried to be more conscious about throwing away less and reusing and repurposing items more.

    Fast forward to the day my trusty Vulfix 2234 Super Badger shaving brush bit the dust. I had used this brush for the past fifteen years, at least. I knew I was long overdue for a new brush, but the badger hair knot could easily be used for tying flies. 

     I tied a handful of flies, with which I will catch trout this season. I picked some "sure winners," like a Rusty Spinner, an Ausable Bomber, and a Cahill-colored Wulff, along with a bucktail-type streamer. I saved the knot. Maybe I'll tie some salmon flies with it, too. 


Not perfectly round, but it will do

     The brush handle seemed like it could be salvaged. I ordered an inexpensive replacement Vulfix while I studied brush reknotting. After lots of reading, I decided to enlarge the socket to accept a larger knot than the original. I ground the hole with a Dremel tool and sanded it smooth. I purchased a new knot from The Golden Nib. I realized I had drilled the hole a little too deep, so I epoxied a couple nickels in the socket to help raise the knot. The nickels actually added a nice weight to the old handle.

Knot loft set with nickels 

     As soon as the new badger hair knot arrived, I epoxied it into the handle. I was shaving with my revamped brush the following evening. Not only was I happy that I didn't throw the handle away, but I was shocked at how much better the recycled brush worked than its predecessor. It was like night and day. I was disappointed that I hadn't thought to get a new brush years ago. With use, over a matter of weeks, the new brush knot broke in nicely and it makes a terrific lather. I actually enjoyed the project so much, I decided to attempt further restorations with vintage brushes. Fly tying actually went on hold while I got my bearings. More on that next week...


The "recycled" brush, now with a 222 mm Finest bulb knot from the Golden Nib