Hammonasset Trout 1 - Little Guy 0

My future netsman

This little fella has been going more and more places lately, so I figured why not fishing? I thought I had this all figured out. We'd go to the Hammonasset River, a mere 20 minutes from home. Worst case scenario, his great aunt is only a mile away, tops. I put on my hippers before leaving home. My rod was already rigged up with a Golden Olive Dabbler and a small Silver Invicta. I figured today was the day to introduce the little guy to his first trout and I figured I had about ninety minutes of fishing time to get the job done. 

I should have taken the dirty diaper upon arrival as a sort of foreshadowing. Fortunately, the back of my Mazda Tribute is the perfect baby changing station. We took care of the stinky mess and were on our way. It was a short walk downhill to a pool where, according to my friend Pete, the trout "rise with blatant impunity."

We made it to the pool and found some small risers. Unfortunately, they were chubs. After bringing two to hand, I spotted a decent sized trout rising in the tail of the pool. Because of the nature of the pool, I had to work downstream to cover the bulk of the deeper water. I hadn't thrown close to enough line to cover that far down the pool before an unexpected thirty minute meltdown began. 

I knew we were done for the day. He wanted out of the car seat and wanted to be held. I tried to calm him down so I could get that one elusive trout and we could be on our way, but it wasn't meant to be. It was time to head home. 

I wish I could give some kind of helpful fishing report to the locals, but we weren't there long enough to see much happen. Plus, my attention was mainly focused on the bank, not the water. On the drive home, I told his mom about my shortest fishing trip ever. She replied, "30 minutes? That's a pretty good amount of time outdoors for him!" Was our trip a success? I didn't think so, but maybe I was wrong. 

I'll give him another month or two before we attempt this again. I know of a stream filled with wild trout and decent enough stroller access. In the meantime, I'll have to phone the Duke of Roxburghe and tell him to postpone our trip to the Alta River until further notice...

The Ever-Maddening Quest for ONE Fly Box

Works for now, I guess

I wish I could be one of those guys who carries a small fly box with just the essentials. As an avid fly tyer, that's just not me. That said, I hate carrying a bunch of boxes. I want one box that does everything, even if it's big. I'm not talking Cliff Bugger Beast big. As long as it fits in the pocket of my wading jacket I'm happy.

I tried a Wheatley swing leaf box. It was ok, but the clips flatten the wings on Butterflies and I find the layout somewhat limiting. I tried one of those C&F style waterproof boxes. It was OK, but the foam notches distorted when I used really heavy irons. The tiny doubles seemed to get lost in that box's streamer-sized foam. The swing leaf soon lost its adhesive properties and fell out. Overall, it was not that durable.

I use a run-of-the-mill large Nubby Tack box for big doubles. So far I really like it. I decided to buy another to house the contents of the old C&F knockoff box. Fly size doesn't seem to matter. The little nubs seem to do a great job with small and large irons alike. Also, I like how I can put a fly anywhere, not just where a slot or clip exists.

Here's my gripe...there aren't many options. There are just three styles of double-sided boxes with Nubby Tack...the one pictured above is the largest size. I have two ideas...one simple and one elaborate. Both are probably outside the realm of reality, but please humor me regardless...

Solution #1

I want to buy sheets of Nubby Tack material and make custom boxes. I think I could make a sweet box. It might look sort of crude, but it would function well. The only hitch in this plan is that no one can buy sheets of Nubby Tack. It's a proprietary material used only in Mill Stream fly boxes. There goes idea #1, the simple solution...if someone knows of some Asian-made Nubby Tack knock-off available in bulk, please let me know!

Solution #2

I want Mill Stream to let me design a box primarily for North American salmon anglers. Here's what it would be:

Left side: A few rows of slightly elevated nubby tack w/spaces in between the rows. This would be the section for dry flies (Bombers, large Wulffs, Carters Bugs, etc.)

Swing leaf: Both sides fully covered in Nubby Tack- One side for Buck Bugs, Butterflies and small flies; the other side for workhorse, medium sized wets, doubles and singles

Right side: fully covered in Nubby Tack- used for large flies; streamers, Muddlers, shrimp patterns, large wets, etc...single and double.

Also, where space is available, I would put some of my more commonly used tube flies (w/hooks). I'd still carry a dedicated tube fly wallet, but I wouldn't necessarily need it on me at all times. I could put just the essentials in this box (mainly Sunrays). The beauty of the Nubby Tack is that it can handle singles, doubles and trebles equally well and not suffer any damage.

The box would be offered in two sizes, the current medium and large. It's a very simple design and it would hold all sizes of flies securely. I think it would be a winner. I think I could even make due with the medium sized box a lot of the time.

Too bad it's even more far fetched than solution #1.

And the search continues...any ideas? Please post 'em